Make Circuits and Switches
Experiment with simple circuits and create your own switches using everyday materials.
What you will need:
- A string of mini light bulbs
- Thin cardboard
- Brass fastners
- Aluminum foil
- Batteries (AA)
Safety note for parents: Please cut the plug off the string of lights and discard the plug.
Here’s what to do:
- To experiment with homemade circuits, first prep some basic components including light bulbs, wires and switches. From the string of lights, cut out individual light bulbs, leaving as much as possible of the plastic coated wires attached to each bulb. Using scissors or a wire stripper, carefully strip about a half inch of the plastic coating off the ends of the coated wires leaving the metal wires exposed at the ends.
- To make additional “wires,” simply fold strips of the desired length of aluminum foil into thin lines. Then experiment with circuits using tape (as needed) to attach foil strips to batteries, switches and light bulbs. Remove the batteries when not in use since they can get warm when left on too long.
- To add a switch to turn your circuit on and off, experiment with variations that involve moveable parts of metal contacting metal to complete the circuit and act as a switch. Paperclips, brass fasteners and pieces of foil all work well.
Take it further:
- What types of touch switches can you devise that use your hands or feet?
- Can you find a way to incorporate a penny or a steel ball into a switch?